User Manuals and Video Training
- Cyclic IMS Overview and Training
- ADC delay and Pushes Per Bin - a description
- An introduction to ECD on the SELECT SERIES Cyclic IMS
- Application Focus - Pointers for HDX data acquisition and processing
- A description of the 'top and tail' experiment for enhanced mobility resolution
- A system suitability test for Cyclic IMS resolution - using the trisaccharide mix
- Converting from bin to millisecond time axis for Cyclic IMS data
- Cyclic IMS DEMO (part 2)
- Cyclic IMS Ion Optics Description
- eMSion ExD cell user guide for Cyclic customers
- Tuning and performing electron capture dissociation with the e-MSion ExD cell
- How to perform multipass CCS calibration using an Excel spreadsheet - A worked example
- How to use the Cyclic IMS Pass Calculator
- How to use the IMScal mobility calibration tool
- Performing Multipass IMS with LC - A worked example
- Performing single and multi-pass IMS on the Cyclic IMS
- Preliminary Customer Training: Waters DESI XS System
- Saving helium on the Cyclic IMS - using the Helium startup and shutdown methods
- Setting Up the Cyclic IMS
- Tuning for Labile analytes in IMS mode
- Tuning settings for the detection of TCA cycle metabolites - Cyclic IMS
- Tuning the Cyclic IMS for labile analytes - TOF mode
- Set up my system and acquire data
- [Video] IMSn - "Slicing"
- [Video] Ion Orbit Animations - IMSn, Top & Tail
- [Video] Removal and replacement of the LockSpray II reference sprayer 715006534
- [Video] Setting up single and multipass separation
- [Video] Top & Tail - Selectively Increasing Resolution
- [Video] Cyclic IMS Ion Optics Introduction
- [Video] Cyclic Tune Page Introduction
- [Video] Ion Orbit Animations - Multiple Passes
- Multisequence Methods
- Troubleshoot and maintain my system
- [Video] High-Performance Sprayer on the DESI XS
- Adding samples to the bottom of a sample list
- Adjusting the solvent delivery tube positions
- Adjusting the solvent delivery tubing positions
- Appending samples to the sample list
- Assembling the source ion block assembly
- Assembling the StepWave ion guide assembly
- Before you begin using the instrument
- Changing the sample list format
- Cleaning the ion block components
- Cleaning the sample cone and cone gas nozzle
- Cleaning the StepWave ion guide assembly
- Cleaning the StepWave ion guide assembly components
- Closing the source isolation valve
- Connecting liquid waste lines
- Creating or editing a MassLynx sample list
- Customizing the sample list display
- DESI XS Technical Reference
- Disassembling the source ion block assembly
- Disassembling the StepWave ion guide assembly
- Editing data in an area
- Emptying the nitrogen exhaust trap bottle
- Fitting the ESI probe tip and gasket
- Fitting the ion block assembly to the source
- Fitting the ion block support to the source
- Fitting the source enclosure to the instrument
- Fitting the StepWave assembly to the source assembly
- Inserting rows in a sample list
- Installing the Tool-Free ESI probe adapter
- Installing the low-volume vials
- Installing the one-piece reference probe
- Installing the reservoir bottles
- Installing the Tool-Free ESI probe assembly
- Installing the Tool-free Probe Assembly
- Opening an existing MassLynx sample list
- Opening the source isolation valve
- Pausing or stopping a MassLynx sample list
- Preparing the IntelliStart Fluidics system
- Purging the infusion pump
- Re-optimizing the ESI probe position
- Removing O-rings and seals
- Removing the ESI probe tip and gasket
- Removing the one-piece reference probe
- Removing the ion block assembly from the source assembly
- Removing the ion block support from the source assembly
- Removing the probe adapter
- Removing the StepWave assembly from the source assembly
- Replacing the ion block source heater
- SELECT SERIES Cyclic IMS Site Preparation Guide
- Setting up the Edwards nXR120i pumps
- What is a MassLynx sample list?