Skip to main content
Waters

Removing O-rings and seals

Article number: 79575

You must remove O-rings or seals from instrument components when performing certain maintenance procedures.

An O-ring removal kit is provided with the instrument:

clipboard_e438715f3934ea80959a4df0cb0de69b5.png

clipboard_e341b19eefe939b1709994396e6e71fa3.png

To remove an O-ring:

exclamation mark.PNG Notice: To avoid damaging the component when removing an O-ring or seal from it, ensure that you do not scratch the component with the removal tool.

Use the tools as aids to pull the O-ring or seal from its groove.

Tip: If you do not plan to reuse the O-ring or seal, you can use the forked end of tool 1 to impale the O-ring or seal to remove it.


bio hazzard.PNG 

Warning: To avoid spreading contamination with biologically hazardous, toxic, and corrosive materials, dispose of all waste materials according to local environmental regulations.

Not able to find a solution? Click here to request help.

  • Was this article helpful?