Adjusting the solvent delivery tubing positions
Article number: 70283
For correct operation of the IntelliStart Fluidics system, you must adjust each solvent delivery tube so that its end is close to, but not touching, the bottom of the reservoir bottle or low-volume vial.
To adjust the position of a solvent delivery tube:
1. Open the access door to the fluidics pump.
2. Loosen the finger-tight fitting for the solvent delivery tube you are adjusting.
PLACEHOLDER FOR NEW IMAGE
3. Move the solvent delivery tube so that its end is close to, but not touching, the bottom of the reservoir bottle or low-volume vial.
4. Tighten the finger-tight fitting.
5. Close the access door.