What is a MassLynx sample list?

A MassLynx sample list is a list of the samples available for analysis by the mass spectrometer. Among other things, it can include:

• Information on the name to be given to the data acquired
• Inlet methods to use
• MS methods to use
• Tune settings to apply

Set up a sample list for each different set of samples you wish to run, then save and load them as they are needed. You can create as many sample lists as you like for each project. The sample list that was open last will be automatically loaded when MassLynx starts.

Sample lists are also utilized by the Application Managers – such as QuanLynx – that can be used to process your data.

Tips:

• Customize the sample list display to hide some of the columns shown by default, and to add many more. Choosing the right columns for the work you are doing can help improve your efficiency when working with MassLynx. For more details, see "Customizing the sample list display".
• Information in hidden columns can influence the way the system operates. If you experience unexpected behavior when running a sample list you have not created yourself, temporarily display the hidden columns to check the contents. For more details, see "Customizing the sample list display".

Minimum requirements for the sample list

If there is an inlet connected, your sample list must contain – as a minimum – the columns indicated in the table below.

Required sample list columns:

Tip: As column names are configurable, they may differ from those given above. The field IDs will remain the same whatever the name of the column.

With these columns displayed, the sample list looks similar to this:

Example sample list:

Using a sample list with these columns enables you to acquire a basic raw data file. When using an Application Manager to process data, more columns are normally required – refer to the Application Manager’s Help for details.