"Restriction Missing" error appears when running Adjust Seal test with 2695 Separations Module - WKB19606
Article number: 19606
SYMPTOMS
- During the Adjust Seal test, "Restriction Missing" error appears
ENVIRONMENT
- 2695 Separations Module
CAUSE
Defective needle
FIX or WORKAROUND
Replace the needle.
ADDITIONAL INFORMATION
This can also be caused by the needle ferrule not set properly. Make sure to set the ferrule and compression screw while holding the needle in place when tightening.
Before replacing the needle, you can also review the article Alliance 2695 error "Restriction missing" when running the adjust seals calibration.
id19606, 2690, 2690D, 2690DUPGD, 2690UP, 2695, 2695D, 2695DE, 2695DEB, 2695DUP, 2695E, 2695EB, 2695INERT, 2695UP, A-10SSM, ALLCOLCLR, ALLCOLHTR, ALLCOLHTRB