200000643 Waters 2535 Quaternary Gradient Module Startup Kit
ENVIRONMENT
- 2535/2545/2555 Quaternary Gradient Module
CONTENT
Waters 2535 Quaternary Gradient Module Startup Kit, Part Number 200000643
| Part Number | Quantity | Item | Image | Description/Location |
|---|---|---|---|---|
|
|
1 |
Kit, Hardware, Helium |
 |
Used to adapt the Helium Supply Source to the Sparge Valve Inlet Bulkhead port. |
|
|
1 |
Syringe, 30mL, Plastic |
 |
When connected to Inlet Manifold Valve (Load Position) solvent can be pushed into Pump Head for priming. |
|
289000858 |
1 |
Assy, Tool, Removal & Insertion, .280 Dia. Seal |
 |
Used for Plunger Seal removal or Rotor Vent Valve Seal Removal. |
|
|
1 |
Compression Screws, Gold, 5-Pack |
Fittings for sparge tube. Note: Ferrules are in helium kit WAT023486). |
|
|
|
1 |
Assy, Tube, Sparge |
 |
Connects to Sparge outlet fitting (supplies helium to solvent Reservoirs). |
|
323000447 |
2 |
Connector Shell, 12 pos |
 |
Shields I/O Connector, on Rear Panel. |
|
|
2 |
Fuse, 10A, 5MM X 20MM, SLO Blow |
 |
Use for rear panel AC Filter assembly. |
|
|
4 |
Ferrule, Set, 1/8 Front/Back |
 |
Spare Ferrule for Solvent Inlet Tube. |
|
415000878
|
1 |
Drip Tray, Top |
 |
Used for leak management with optional detector or pump. |
|
|
1 |
Assy, Tube, System Outlet |
 |
Used for connecting the 25X5QGM Filter outlet port to the injector inlet port. |
|
430001022 |
2 |
Tubing, .38"OD X .25"ID X 60”L |
 |
Drain line for front Drip Tray. |
|
|
75" |
Tubing, 3/16 OD x 1/16 ID Tygon |
 |
Seal wash outlet tube. Connects to left pump head.
|
|
430002124 |
1 |
Assy, Tube, Priming |
 |
Attaches to Left side of Inlet manifold Valve and syringe for priming. |
|
430002131 |
1 |
Assy, Tubing, Seal Wash Inlet |
 |
Connects to Seal Wash Pump Inlet. |
|
1 |
Assy, Tube, Sample Loading |
 |
Connects to Left side of Inlet Manifold Valve for direct sample loading through pump. |
|
|
430002175 |
1 |
Assy, Tubing, Vent Valve to Waste |
 |
Connects Vent Valve port 3 to waste container. |
|
430002199 |
1 |
Tube, .062 X .040 X120 inch L |
 |
Used to connect Sparge Inlet Bulkhead Union to helium supply.
|
|
430002315 |
1 |
Assy, Tube, Solvent Inlet |
 |
Solvent inlet lines connected to the inlet manifold ports. |
|
|
1 |
Cable, Ethernet Patch, Shielded, 10’ |
 |
Used to connect the 25X5QGM to the Ethernet Hub. |
|
|
2 |
Assy, Event Cable 6 ft. |
 |
Used for timed events triggering from the rear of the 25X5QGM. |
|
|
1 |
Cable, Ethernet, Crossover, Shielded 10 ft. |
 |
Used to connect the 25X5QGM directly to the computer. |
|
605000106 |
1 |
Forceps, Nylon, Reinforced |
 |
Used to replace the seal on Vent Valve. |
|
700005114 |
1 |
Marker Set, 1/8 Tubing, QGM, PKG 2 |
 |
Used to identify the tubing at the solvent bottle. |