How to reboot the electronics of an ACQUITY RDa when it is already powered-on - WKB257888
Article number: 257888
OBJECTIVE or GOAL
Power-cycle an ACQUITY RDa that is already powered-on.
ENVIRONMENT
- waters_connect
PROCEDURE
- Do not exit waters_connect. Have the system console open for review.
- Power-down the instrument by pressing and holding the power button for approximately five seconds, until the instrument powers-down.
- To power-up the instrument, wait approximately15 seconds, and then press the power button.
- Wait approximately five minutes.
- When the instrument is ready, the Operate button on the Console page becomes available. When this happens, click the Operate button.
- Wait for the instrument to reach the correct vacuum pressure. When this occurs, the Instrument Setup function becomes available on the Console page.
ADDITIONAL INFORMATION
id257888, RDA