How to drain the solvent that collects in the source exhaust line at the outlet of the solenoid on the exhaust trap bottle - WKB246569
Article number: 246569
OBJECTIVE or GOAL
Drain the solvent from the source exhaust line at the outlet of the solenoid on the exhaust trap bottle.
ENVIRONMENT
- SQ Detector
- ACQUITY TQD system
- TQ Detector
- SQ Detector 2
- Xevo TQ Absolute
- Xevo TQ MS
- Xevo TQD
- Xevo TQ-GC
- Xevo TQ-S
- Xevo TQ-S cronos
- Xevo TQ-S micro
- Xevo TQ-XS
- Synapt HDMS
- SYNAPT G2
- SYNAPT G2 MS/HDMS
- SYNAPT G2-S MS/HDMS
- SYNAPT G2-Si MS/HDMS
- SYNAPT G2-S
- SYNAPT G2-Si
- SYNAPT XS
- Vion IMS QTof
- Xevo QTof
- Xevo G2 QTof
- Xevo G2 Tof
- Xevo G2-S
- Xevo G2-S QTof
- Xevo G2-S Tof
- Xevo G2-XS
- Xevo G2-XS QTof
- Xevo G2-XS Tof
PROCEDURE
- Push in on the collar of the Legree fitting while pushing in on the exhaust tubing.
- While holding the collar of the Legree fitting, pull out the exhaust tubing.
- Allow solvent to drain away.
- Push the exhaust tubing back into the Legree fitting as far as it will go.
ADDITIONAL INFORMATION