How to change to APCI from ESI on a Xevo TQ MS detector - WKB14612
Article number: 14612
OBJECTIVE or GOAL
Change to APCI from ESI on a Xevo TQ MS detector.
ENVIRONMENT
- MassLynx
- Xevo TQ MS
PROCEDURE
- Replace the ESI probe with an APCI probe, as shown in the customer familiarization guide.
- Install a corona pin in the pumping block.
- The instrument will recognize that an APCI probe is installed.
ADDITIONAL INFORMATION
Xevo TQ MS Operator’s Overview and Maintenance Guide (71500130002)
id14612, Electrospray, MLYNX, MLYNXV41, SUPMM, XEVOTQ, XEVOTQA, XEVOTQIVD