Set pressure diagnostic fails on nanoACQUITY - WKB1952
Article number: 1952
SYMPTOMS
- After thoroughly priming the pump, the set pressure diagnostic, set for 500 psi above the typical operating pressure, fails with a message that the leak rate is above the acceptable limit
ENVIRONMENT
- MassLynx 4.1
- nanoACQUITY
CAUSE
Loose fittings
FIX or WORKAROUND
Tighten the fittings slightly.
ADDITIONAL INFORMATION
See the online Help for details on how to run the set pressure diagnostics, or see the article How to run the set pressure diagnostic on a NanoACQUITY or ACQUITY M-Class.
id1952, MLYNX, MLYNXV41, SUPMM, UPNAYXPMP, UPNSAMMGR, UPNSOLMGR