How to monitor the MassLynx and/or AutoLynx queue via the status.ini file - WKB76207
Article number: 76207
OBJECTIVE or GOAL
Monitor the queue status using the MassLynx status file, after submitting either an OpenLynx batch file (.OLB) to AutoLynx or a MassLynx sample file to run.
ENVIRONMENT
- MassLynx
- AutoLynx
- OpenLynx
PROCEDURE
Configure the Status.ini file to refresh at a suitable frequency:
- In the Tools shortcut, select Options.
- Under MassLynx Status, select the "Update status" box and change the refresh rate to a suitable time relative to the run time and how often you want to check the status (e.g., 20 seconds if using short run times).
- Note the location of the status.ini file. Default is C:\MassLynx.
- Ensure that the PC user has rights to write/modify the status.ini file.
- Restart MassLynx.
- If using, configure AutoLynx.
- Analyze samples either by adding to the sample list or, for AutoLynx, adding .OLB files to the AutoLynx Queue folder.
- The C:\MassLynx\status.ini file will be updated with information as samples are added and analyzed.
- When the queue is empty, the status.ini file will show this too.
- Look for [Queue Status].
ADDITIONAL INFORMATION
id76207, MLYNX, MLYNXV41, SUPMM