What is the conversion factor used by Quanpedia for the cone voltage when converting a Xevo TQ MS method to a Xevo TQ-S method? - WKB11377

ENVIRONMENT

• MassLynx 4.1
• Quanpedia
• Xevo TQ MS
• Xevo TQ-S

ANSWER

For any cone voltage less than 30 V in the TQ MS method, the CV in the TQ-S method would be set to 30 V. For any CV of 30 V or greater, the setting would be the same.

Xevo TQ MS CV    Xevo TQ-S CV

20                >           30
28                >           30
36                >           36
30                >           30

However, it is recommend wherever possible to check the CV for the optimum setting.

ADDITIONAL INFORMATION