Empower 3: Is it possible to quantify using different processing methods for Standard and Unknown? - WKB99917
Article number: 99917
ENVIRONMENT
- Empower 3
ANSWER
No, this is not possible.
Since the calibration curve is saved along with the processing method, it is necessary to create the calibration curve and perform quantification using the same processing method.
In addition, the system name and channel name must be the same for the Standard used for the calibration curve and the Unknown for the quantification.
If they are different, you cannot use the calibration curve even if you use the same processing method.
ADDITIONAL INFORMATION
id99917, EMP2LIC, EMP2OPT, EMP2SW, EMP3GC, EMP3LIC, EMP3OPT, EMP3SW, EMPGC, EMPGPC, EMPLIC, EMPOWER2, EMPOWER3, EMPSW, SUP