What licenses are required to bring a Perkin Elmer system online in Empower? - WKB99214
Article number: 99214
ENVIRONMENT
- Perkin Elmer LC or GC
- Empower 3
ANSWER
NOTE: The information below is only for the Empower licensing structure. Do NOT refer to this for Instrument support under the Empower version. Refer to Perkin Elmer's GC /LC release notes to confirm the minimum Empower version supported for the Instrument models.
Perkin GC Instruments
| Perkin Instruments Model / Type | Empower Version | Instrument Type | Driver Version | Instrument Catalog Version | License Enforced? | Licenses Required |
| Perkin GC 2400 | ≥ Empower 3.7.0 | PKIGC | Agilent ICF SL 3.7.01 and above installed with the Perkin ICF GC driver. |
Version 3 | Yes | Empower System Control and Perkin GC License |
| Version 2 | No |
Empower System Control and Perkin GC License* Recommended v3 Catalog |
||||
| Version 1 | No | Not Supported. | ||||
| < Empower 3.7.0 | PKIGC | Agilent ICF SL 3.7.01 and above installed with the Perkin ICF GC driver. |
NA | No | Empower System Control and Perkin GC License* | |
| Clarus 580 Clarus 590 Clarus 680 Clarus 690 |
≥ Empower 3.7.0 | Clarus 580 Clarus 590 Clarus 680 Clarus 690 |
Legacy Perkin Elmer GC Driver. Note: Does not require Agilent ICF Support Layer |
Version 3 | Yes | Empower System Control and Perkin GC License* |
| Version 2 | No | Empower System Control and Perkin GC License* | ||||
| Version 1 | No | Empower System Control and Perkin GC License* | ||||
| < Empower 3.7.0 | Clarus 580 Clarus 590 Clarus 680 Clarus 690 |
NA | No | Empower System Control and Perkin GC License* | ||
| HS 40 HS 110 |
≥ Empower 3.7.0 | HS 40 HS 110 |
Legacy Perkin Elmer HS Driver Note: Does not require Agilent ICF Support Layer |
Version 3 Version 2 Version 1 |
No | Not Required |
| < Empower 3.7.0 | NA | No | Not Required |
* Paper-based GC License, un-enforced
Perkin LC Instruments
| Perkin Instruments Model / Type | Empower Version | Instrument Type | Driver Version | Instrument Catalog Version | License Enforced? | Licenses Required |
| Perkin LC 300 | ≥ Empower 3.7.0 | PKILC | Agilent ICF SL 3.7.01 and above installed with the Perkin ICF LC driver |
Version 3 | Yes | Empower System Control and Perkin LC License |
| Version 2 | No | Empower System Control and Perkin LC License** | ||||
| Version 1 | No | Not Supported. | ||||
| ≥ Empower 3.7.0 | AgLC | Agilent ICF SL 3.5 and till ICF SL 3.6.1 installed with the Perkin ICF LC driver |
Version 3 | Yes | Empower System Control and Agilent LC License | |
| Version 2 | Yes | Empower System Control and Agilent LC License | ||||
| Version 1 | Yes | Empower System Control and Agilent LC License | ||||
| < Empower 3.7.0 | PKILC | Agilent ICF SL 3.7.01 and above installed with the Perkin ICF LC driver |
NA | No | Empower System Control and Perkin LC License** | |
| < Empower 3.7.0 | AgLC | Agilent ICF SL 3.5 and till ICF SL 3.6.1 installed with the Perkin ICF LC driver |
NA | Yes | Empower System Control License and Agilent LC license | |
| Perkin Flexar LC Instruments | ≥ Empower 3.7.0 | FLX-Pump FLX-UV FLX-PDA FLX-CO FLX-AS |
Legacy Perkin Elmer LC Driver. Note: Not supported in ICF-based control |
Version 3 | Yes | Empower System Control and Perkin LC License** |
| Version 2 | No | Empower System Control and Perkin LC License** | ||||
| Version 1 | No | Empower System Control and Perkin LC License** | ||||
| < Empower 3.7.0 | FLX-Pump FLX-UV FLX-PDA FLX-CO FLX-AS |
NA | No | Empower System Control and Perkin LC License** |
** Paper-based LC License, un-enforced
ADDITIONAL INFORMATION
id99214, EMP2LIC, EMP2OPT, EMP2SW, EMP3GC, EMP3LIC, EMP3OPT, EMP3SW, EMPGC, EMPGPC, EMPLIC, EMPOWER2, EMPOWER3, EMPSW, SUP