BusLAC/E not booted ok - WKB5876
Article number: 5876
SYMPTOMS
- BusLAC/E driver seems to load
- BusLAC/E not booted ok in node properties "General" tab
ENVIRONMENT
- Empower
- Empower 2
- Empower 3
CAUSE
The National Instruments GPIB card was used in place of a Waters busLAC/E card.
FIX or WORKAROUND
- Remove the National Instruments card and install a Waters busLAC/E card.
ADDITIONAL INFORMATION
The National Instruments GPIB card is an IEEE interface card that is used for MassLynx workstations. It is not intended for use with Empower workstations and/or LAC/E boxes and is not recognized by Empower.
id5876, EMP2LIC, EMP2OPT, EMP2SW, EMP3GC, EMP3LIC, EMP3OPT, EMP3SW, EMPGC, EMPGPC, EMPLIC, EMPOWER2, EMPOWER3, EMPSW, SUP