How to remove and clean the SELECT SERIES MALDI hexapole
Article number: 243609
To remove and clean the SELECT SERIES MALDI hexapole:
- Close the isolation valve.
- Vent the source.
- Open the MALDI source door.
- Squeeze the trigger at the top to release the hexapole, and slide the hexapole out using the guide rail.
- Clean and sonicate the hexapole with with an appropriate solvent (i.e. a solvent that will dissolve the matrix being used).
- Dry the hexapole with nitrogen.
- Engage the guide rail an re-insert the hexapole until you hear a click.