MRT Tune and Imaging Control Page
Article number: 239799
Overview
The following articles give an overview of:
- MRT Hardware overview
- MRT Tune page
- DESI Imaging control page overview
- How to importing a slide image into the imaging control page
- Single Reaction Experiment Overview
- Constant Velocity Experiment Overview
- Multi-region Experiment Overview
- Creating an MS(MS) Acquisition Method
- Intensity Preview / Image Heatmap
- How to align the sprayer and stage of the the DESI source
- MALDI Imaging control page
- How to perform a mass scale calibration on MRT
- The well-plate workflow for non-imaging instruments
How to set up an imaging experiment
Steps required*
Import optical image of slide into software
- Select region(s) for imaging from imported optical image
- Define imaging parameters
- Define MS acquisition parameters
- Acquire data
* Assumes detector is set up and desired mass range is calibrated.