200000505 Waters Alliance iS System Startup Kit
ENVIRONMENT
- Alliance iS HPLC System
CONTENT
Waters Alliance iS System Startup Kit Part Number 200000505
| Part Number | Quantity | Item | Image | Description |
|---|---|---|---|---|
|
3 |
HOLDER, 48 WELL, 2ML VIAL |
 |
Holds 2 mL sample vials. |
|
|
415004446 |
1 |
TOOL, PLUNGER REMOVAL |
 |
Used to remove pump's plungers for service. |
|
410001522 |
1 |
NUT EXTENDER, FLANGELESS, ALUMINUM |
 |
Used on the Degasser Fittings. |
|
120" |
TUBING, TYGON, .375 OD X .250 ID |
 |
System drain tubing. |
|
|
410004976 |
2 |
STRAIGHT CONN, BARBED, HDPE, 1/4" ID TUBE |
 |
Used for routing of drain tubing. |
|
405030361 |
1 |
PIN, CALIBRATION, RZZ |
 |
Used for orienting sample tray relative to datum base and calibrating position of Needle Carriage. |
|
289016376 |
1 |
ASSY, PLUG, WITH TUBE, SYSTEM WASTE |
 |
To cap off the condensate fitting in the back of Waste Tray, when draining the condensate to the rear. |
|
279005807 |
1 |
ASSY, BOTTLE TRAY, WINDOW |
 |
Attached to the top of the system. |
|
289016411 |
1 |
ASSY, CLIP, TUBE MANAGEMENT, BLACK |
 |
Installed in the bottle tray, will guide the solvent tubes to the bottles. |
|
|
1 |
PLUG, PIN, HIGH PRESSURE |
 |
Plugs valve ports when troubleshooting. |
|
405029839 |
2 |
Screw, Latch, FH, M4 |
 |
Secures rear of the Bottle Tray to TUV. Important: TIGHTEN TO BOTTOM PLUS 1/4-TURN |
|
1 |
Ethernet Patch Cord, 25' |
 |
Connects workstation to system's LAN port. |
|
|
415001278 |
24 |
PLUG, LINER, BOTTLE CAP |
 |
To plug up the unused ports in the bottle caps. |
|
441002763 |
1 |
CABLE, USB-A MALE TO USB-A MALE (0.5M) |
 |
Connects the Bottle Tray to the system's USB port |