200000281 Waters ACQUITY Premier Accessories Kit
ENVIRONMENT
- ACQUITY PREMIER System
CONTENT
Waters ACQUITY Premier Accessories Kit Part Number 200000281
| Part Number | Quantity | Item | Image | Description |
|---|---|---|---|---|
|
289014705 |
1 |
Assy, bottle tray, PREMIER |
 |
To secure bottles. |
|
405013532 |
1 |
Calibration Pin, RZZ Mechanism |
|
Used for orienting sample tray relative to datum base and calibrating position of Needle Carriage. Calibrate Rotary Tray (console needs to be in “Service Mode” to access this function). Pin is stored in designated pocket in door insulation after installation of SM |
|
1 |
Kit, column support clip |
 |
Supports columns in heater trough. |
|
|
2 |
Holder, 48 Well, 2mL Vial |
 |
Holds 2mL sample vials. |
|
|
1 |
Syringe, Plastic, 30 mL |
 |
Used to pull Mobile Phase (e.g. water/IPA) through the Inlet of the Pump during Initial Startup to wet the Check Valves. |
|
|
410001380 |
1 |
Adapter, Female Luer to Barbed, .030 ID |
 |
Assists in Priming Seal Wash Outlet Tubing. |
|
4" |
Tubing, .156 OD x .031 ID, Pharmed |
 |
Assists in Priming Pump. |
|
| WAT041958 | 1 | Needle, Hypo 17 Gage SS. |  |
Assists in Priming Pump. |
| 615003783 | 2 | Label, 48 Well, 2mL Vial, Open Access |  |
Used to Identify vial positions in MassLynx. |
|
1 |
Ferrule, PEEK, 1/16, HPFT, 3 Pk |
 |
Used in case Ferrules are misplaced or lost. |
|
|
WAT212369 |
4 |
Bumper, Tapered Round |
 |
Replacement Anti-Skid Pads for Large Feet. |
|
|
4 |
Ferrule, set, .062, two-piece |
 |
Spare Two-Piece Ferrules. |
|
4 |
Scr, comp, 10-32, ¼ hex, 304SS, Gold, plt. |
 |
Spare 10-32 Compression Screws |
|
|
|
4 |
Foot, rubber, .75 Diameter x .28 Tall |
 |
To be used with the Sample Organizer. |
|
WAT411408 |
4 |
Screw, M4 x 8, Pan Head, Hexalobular, SS |
 |
To Fasten 410001724 to Chassis. |
