How to use the HDX-2 leap temperature controller - WKB5270
Article number: 5270
OBJECTIVE or GOAL
Set the temperature in the range of 0 to 25 °C.
ENVIRONMENT
- HDX
- HDX-2
PROCEDURE
To change the set temperature:
- Press the SET button twice. The display changes to show the current set temperature.
- Press the up or down arrow buttons to the desired set temperature.
- Press SET again to accept the new value.
- Press SET and ▼ at the same time to exit the menu
ADDITIONAL INFORMATION
This is a cooler and there is no active heating. If the ambient temperature is below 25 °C, the unit will not reach 25 °C.
id5270, LEAPPAL3, UPNHDXMGR