How to Pair a Device+? - WKB324166

OBJECTIVE or GOAL

To pair a Device+ to Onelab

ENVIRONMENT

Andrew+
Device+
OneLab SaaS
Onelab Enterprise
Onelab Standalone Server

PROCEDURE

Press the power button five times to initialize Bluetooth mode.
Wait for the LED indicator to begin blinking blue.
Once the Device+ LED is blinking blue, navigate to your Wi-Fi settings, locate the network Device+ (Peltier-518.XXXX.XXXX), and connect to it.
Open a web browser and enter the following URL: http://192.168.2.1
Click Start Installation. Note: The WiFi and Ethernet MAC address are displayed
Choose your preferred connection method — either Wi-Fi or Ethernet cable. For this example, Wi-Fi will be used.
Select the Wi-Fi network you wish to connect the Device+ to.
Enter the corresponding Wi-Fi password.
For SaaS deployment, please enter your OneLab credentials. For Enterprise deployment, the OneLab address should be provided by the customer's IT department. For Standalone deployment, enter Work email: onelab@andrewalliance.com Password: onelab
The Device+ will now attempt to connect to OneLab. Wait until the LED indicator turns green.
If the LED turns red, reconnect to the Device+ network (Peltier-518.XXXX.XXXX). OneLab will display an error notification.
The Device+ reattempts to connect to OneLab. Wait until the LED indicator turns green before clicking the green option.
Click Go to OneLab and log in to your account.
Choose the lab to which you would like the Device+ to be assigned.
You may rename the Device+ for easier identification, especially if multiple devices of the same type are present.
Navigate to the Devices tab. Select the Device+ from the list of connected devices.
Click Locate Me — the LED of the Device+ should begin pulsing violet, confirming a successful connection.
Click Stop to end the pinging process.

ADDITIONAL INFORMATION

1. Press the power button five times to initialize Bluetooth mode 2. Wait for the LED indicator to begin blinking blue 3. Once the Device+ LED is blinking blue, navigate to your WiFi settings 3. Locate the network Device+ (Peltier-518.XXXX.XXXX) and connect to it 3a. The LED of the Device+ will change from blinking to solid blue when connected 4. Open a web browser and enter the following URL: http://192.168.2.1 5. Click Start installation Note: The WiFi and Ethernet MAC address are displayed 6. Choose your preferred connection method either WiFi or Ethernet cable For this example, WiFi will be used 7. Select the WiFi network you wish to connect the Device+ to 8. Enter the corresponding WiFi password 9. For SaaS deployment, please enter your OneLab credentials 9. For Enterprise deployment, the OneLab address should be provided by the customer's IT department 9. For Standalone deployment, enter Work email: onelab@andrewalliance.com Password: onelab 10. The Device+ will now attempt to connect to OneLab. Wait until the LED indicator turns green 11. If the LED turns red, reconnect to the Device+ network (Peltier-518.XXXX.XXXX) 11. Once you connect back to the Device+, the error page message will appear on the installation page 12. The Device+ reattempts to connect to OneLab. Wait until the LED indicator turns green before clicking the green option 13. Click Go to OneLab and log in using your OneLab credentials 14. Choose the lab to which you would like the Device+ to be assigned 15. You may rename the Device+ for easier identification 16. Navigate to the Devices tab then the newly connected Device+ 17. Click Locate device. The Device+ should begin pulsing violet, confirming a successful connection 18. Click Stop to end the pinging process