What is the part number and ID of tubing for the red line coming from 2695 injector going into the 2489 detector? - WKB8847
Article number: 8847
ENVIRONMENT
- Alliance HPLC System
- 2695 Separations Module
- 2695D Dissolution Separations Module
- 2487 Dual-Wavelength Absorbance Detector
- 2489 UV/Vis Detector
ANSWER
The standard tubing is ASSY, TUBE, PEEK, 0.005 ID, 20.0" LONG - 430000922
ADDITIONAL INFORMATION
Some customers may use a 0.009 ID,34" Long stainless steel red outlet line (WAT270979 ) for the original injector design, the Phase II injector outlet line is welded in and cannot be removed from the seal pack as seen in the photo below.
