How to change the IEEE address on an Alliance instrument - WKB59752

OBJECTIVE or GOAL

Change the IEEE address on an Alliance.

ENVIRONMENT

• 2695 Separations Module
• 2795 Separations Module

PROCEDURE

1. From the main screen on the front of the Alliance, press the "configure" button at the bottom of the screen.
2. On the right-hand side of the screen, a little above center, find the "IEEE 488 Address" field.
3. Use the directional keys on the keypad to highlight this field.
4. Type the new IEEE 488 address.
5. Press the "exit" key on the keypad.
6. The configuration is automatically saved.

ADDITIONAL INFORMATION