How to switch between HTCH and 30-cm column heater/cooler on the same system configuration - WKB5078
Article number: 5078
OBJECTIVE or GOAL
To switch between the ACQUITY UPLC High-Temperature Column Heater (HTCH) and ACQUITY UPLC 30-cm Column Heater/Cooler (30-cm CHC) when both are in the system configuration.
ENVIRONMENT
- ACQUITY UPLC Sample Manager
- ACQUITY UPLC High-Temperature Column Heater (HTCH)
- ACQUITY UPLC 30-cm Column Heater/Cooler (30-cm CHC)
PROCEDURE
- Both column compartments are connected using the Y cable, (700004442 Y-Cable, HD D-Sub)
- Can only use one column compartment at a time
- To change from one to the other:
- To control the temperature of the HTCH:
- Power-off the 30-cm Column Heater/Cooler.
- Power-off the Sample Manager.
- Power-on the Sample Manager.
- To control the temperature of the 30-cm CHC:
- Power-on the 30-cm Column Heater/Cooler.
- Power-on the Sample Manager.
- To control the temperature of the HTCH:
ADDITIONAL INFORMATION
The length of Y cable(700004442 Y-Cable, HD D-Sub) is 27.5+/-0.5 inch
id5078, UPBINARY