Seal wash pump does not prime after solvent line goes dry - WKB262106
Article number: 262106
SYMPTOMS
- Seal wash solvent runs out or drops below level of the line in the solvent bottle
- Priming seal wash pump does not draw solvent from the bottle
ENVIRONMENT
- Waters 2545 Binary Gradient Manager (BGM)
CAUSE
Seal wash pump is unable to draw air and solvent through the lines.
FIX or WORKAROUND
- Fill the seal wash solvent bottle with the appropriate seal wash solvent.
- Disconnect the seal wash solvent line from the top of the seal wash pump.
- Draw solvent into the seal wash solvent line using a syringe.
- Reconnect the seal wash solvent line to the top of the seal wash pump.
- Prime the seal wash pump.
ADDITIONAL INFORMATION
id262106, 2545, 2545Q