Skip to main content
Waters

How do I set up an Agilent G7102A or G4260B with Empower 3? - WKB18549

Article number: 18549

OBJECTIVE or GOAL

Set up an Agilent G7102A or G4260B with Empower.

ENVIRONMENT

  • Empower 3
  • Agilent 1260 with G4260B ELSD
  • Agilent 1290 with G7102A ELSD

PROCEDURE

  1. On the www.Waters.com site, see TECN134960784.
  2. Install the required Agilent drivers listed.
  • Agilent ELS detectors must meet minimum firmware requirements.
  • The customer needs appropriate cables (RS-232, LAN cable, trigger signals, and others), depending on instrument model (see guide).
  • Agilent document G7102-90200 (see below) guides the customer through installation and configuration.

Not able to find a solution? Click here to request help.