Where can I find a list of devices that have been tested with the Waters Serial Device Support software? - WKB57949
ENVIRONMENT
- NuGenesis 9
- NuGenesis 8
- Waters Serial Device Support (SDS) 2.0
ANSWER
The following table lists the instruments which have been tested by Waters for compatibility with SDS. If an instrument is not in this list, it does not mean that it is incompatible, only that the specific model has not been tested. For an instrument to be compatible with SDS, it needs either an RS-232 serial port or a USB port with a USB-to-RS232 adapter. Such adapters are usually provided by the instrument manufacturer. Waters does not provide, nor recommend, any generic USB-to-serial adapters.
| Manufacturer/Vendor | Model Name/Number | Device Type | Compatiblewith SDS? | Comments |
| Accumet | AB15 | pH meter | YES | If using Passive mode with this meter, configure the meter to print only the currently displayed data, not the stored data. |
| Accumet | AR15 | pH meter | YES | Requires firmware v1.04 or later for SDS Active mode |
|
Advanced Instruments |
2020 |
Osmometer |
YES |
Works only in Passive mode. Does not need manufacturer’s cable. Later firmware versions have a “LIMS Mode”, which is optimal for Waters SDS. |
|
Agilent |
708-DS |
Dissolution test machine |
NO |
It cannot output data. |
|
AND |
HR-202 |
Balance |
YES |
|
|
AND |
GR-202 |
Balance |
YES |
|
|
Arkray |
OM-6060 |
Osmometer |
YES |
It is not possible to obtain the Calibration Date. |
| Atago | Rx | Digital Refractometer | Yes | works also Bidirectional |
|
BUCHI |
M-565 |
Melting-point apparatus |
NO |
It cannot output data. |
|
Copley Scientific |
TPK 2000 |
Flow controller |
YES |
|
|
KONICA MINOLTA |
CM-5 |
Color difference meter |
NO |
It sends to each row a command of <CR><LF>. |
|
Decagon Devices |
AquaLab 4TEV DUO |
Water activity equipment |
YES |
|
|
DKK-TOA |
HM-60G |
pH meter |
YES |
|
|
Elga |
Purelab Ultra |
Water purity |
YES |
|
|
Gonotec |
Osmomat 030 |
Osmometer |
YES |
Instrument operation is very important. It can obtain the value with correct operation on the instrument. |
|
Heraeus |
Multifuge 3 |
Centrifuge |
NO |
It is not possible to use the Heraeus Multifuge 3 centrifuge with SDS. The instrument only sends a continuous data stream through the port. |
|
Hiranuma Sangyo |
AQV-2200A |
Karl Fischer moisture titrate |
YES |
|
|
Hiranuma Sangyo |
AQV-2100 |
Karl Fischer moisture titrate |
YES |
|
|
Hiranuma Sangyo |
COM-1700S |
Potentiometric titrator |
YES |
It is not possible to output the chart. |
|
Horiba |
DS-72 |
Conductivity |
YES |
|
|
Horiba |
F52 |
pH meter |
YES |
|
|
Horiba |
F55 |
pH meter |
YES |
This device has two channels. In order to get data from both channels, you must create two SDS configuration files. The manufacturer’s cable is not required. |
|
Horiba |
F74 |
pH meter |
YES |
|
|
Horiba |
F71S |
pH meter |
YES |
|
|
Kyoto Electronics |
DA-130N |
Density/specific gravity meter |
YES |
|
|
Kyoto Electronics |
AMKA-510 |
Karl Fischer moisture titrate |
NO |
It sends to each row a command of <CR><LF>. |
|
Metrohm |
737KF |
Coulometer |
YES |
|
|
Metrohm |
756KF |
Coulometer |
YES |
|
|
Metrohm |
780 |
pH meter |
YES |
|
|
Metrohm |
784KFP |
Titrator |
YES |
Requires a Null Modem cable or adapter in order to connect to a PC or Tibbo server. |
|
Metrohm |
KF Titrino 701 |
Titrator |
YES |
Requires a Null Modem cable or adapter in order to connect to a PC or Tibbo server. |
|
Mettler Toledo |
204-S |
Balance |
YES |
|
|
Mettler Toledo |
AB204-S |
Balance |
YES |
|
|
Mettler Toledo |
AB54-S |
Balance |
YES |
|
|
Mettler Toledo |
AE-118DR |
Balance |
YES |
|
|
Mettler Toledo |
AG204DR |
Balance |
YES |
Dedicated connection cable. It is possible to use only in Active mode. |
|
Mettler Toledo |
AL204 |
Balance |
YES |
|
|
Mettler Toledo |
AT200 |
Balance |
YES |
|
|
Mettler Toledo |
AT-261 Delta Range |
Balance |
YES |
Requires a Mini Mettler cable from Mettler Toledo. |
|
Mettler Toledo |
AX205 |
Balance |
YES |
|
|
Mettler Toledo |
AX205DR |
Balance |
YES |
|
|
Mettler Toledo |
AX26 |
Balance |
YES |
|
|
Mettler Toledo |
HR73 |
Moisture analyzer |
YES |
Requires a special cable from the manufacturer in order to connect to a PC. |
|
Mettler Toledo |
HR83-P |
Moisture analyzer |
NO |
Dedicated connection cable. It needs specific software from Mettler Toledo to output data. |
|
Mettler Toledo |
ME 4002 |
Balance |
YES |
|
|
Mettler Toledo |
MX5 |
Balance |
YES |
|
|
Mettler Toledo |
MS1602S |
Balance |
YES |
|
|
Mettler Toledo |
PB303-S |
Balance |
YES |
|
|
Mettler Toledo |
PB5001-S |
Balance |
YES |
|
|
Mettler Toledo |
PG2002-S |
Balance |
YES |
|
|
Mettler Toledo |
PL202-S |
Balance |
YES |
|
|
Mettler Toledo |
PL601-S |
Balance |
YES |
|
|
Mettler Toledo |
PM30K |
Balance |
YES |
|
|
Mettler Toledo |
PM400 |
Balance |
YES |
|
|
Mettler Toledo |
SevenMulti |
pH meter |
YES |
|
|
Mettler Toledo |
S20 SevenEasy |
pH meter |
YES |
|
|
Mettler Toledo |
XP204 |
Balance |
YES |
|
|
Mettler Toledo |
XP205 |
Balance |
YES |
|
|
Mettler Toledo |
XP4002 |
Balance |
YES |
|
|
Mettler Toledo |
XP56 |
Balance |
YES |
|
|
Mettler Toledo |
XP5003 |
Balance |
YES |
|
|
Mettler Toledo |
XPE56Q |
Balance |
YES |
|
|
Mettler Toledo |
XS105 |
Balance |
YES |
|
|
Mettler Toledo |
XS204 |
Balance |
YES |
|
|
Mettler Toledo |
XS205 |
Balance |
YES |
|
|
Mettler Toledo |
XSE205 |
Balance |
YES |
|
|
Mettler Toledo |
XS-802S |
Balance |
YES |
|
|
Mettler Toledo Karl Fischer |
DL38 |
Titrator |
YES |
|
|
Mitutoyo |
293-411 |
Micrometer |
YES |
Dedicated connection cable |
|
Mitutoyo |
500-211 |
Vernier caliper |
YES |
Dedicated connection cable |
|
NihonDenshoku |
SE-2000 |
Spectrocolorimeter |
YES |
|
|
NihonDenshoku |
SE-6000 |
Spectrocolorimeter |
YES |
|
|
OHaus |
Adventurer AX 224 M |
Balance |
YES |
|
|
OHaus |
AV264CM |
Balance |
YES |
|
|
OHaus |
Discovery |
Balance |
YES |
|
|
OHaus |
Explorer |
Balance |
YES |
|
|
OHaus |
PA512 CM |
Balance |
YES |
|
|
Okada Seiko |
PC-30 |
Hardness meter |
YES |
|
|
Pharma Test |
PTWS310 |
Dissolution test machine |
NO |
It cannot output data. |
| Randox | Evolution | Toxicology testing | NO | Requires acknowledgements from receiving device for RS232 connections. SDS cannot send these acknowledgements. |
| Randox | Evidence | Toxicology testing | NO | Same issue as Randox Evolution. |
| Randox | Investigator | Toxicology testing | NO | Same issue as Randox Evolution. |
|
RION |
KL-04A |
Light obscuration particle counter |
YES |
Dedicated USB-RS232c cable |
|
Rudolph Research Analytical |
AUTOPOLE5 |
Automatic polarimeter |
NO |
It sends to each row a command of <CR><LF>. |
|
Sartorius |
CPA224S |
Balance |
YES |
|
|
Sartorius |
CP225D |
Balance |
YES |
Requires the DTR/DSR hardware flow control option in SDS. For direct RS232 connections, set DTR = “online”.in the SDS configuration . |
|
Sartorius |
ED224S |
Balance |
YES |
|
|
Sartorius |
ED6202S-CW |
Balance |
YES |
|
|
Sartorius |
CUBIS MSA225P |
Balance |
YES |
|
|
Sartorius |
CUBIS MSE224S-000-DU |
Balance |
YES |
|
|
Sartorius |
ME235P |
Balance |
YES |
|
|
Sartorius |
MSA125P-000-DI |
Balance |
YES |
|
|
Sartorius |
QUINTIX 1102-1S |
Balance |
YES |
Dedicated miniA USB cable |
|
Sartorius |
QUINTIX 2102-1S |
Balance |
YES |
Dedicated miniA USB cable |
|
Sartorius |
QUINTIX 213-1S |
Balance |
YES |
Dedicated miniA USB cable |
|
Sartorius |
R200D |
Balance |
YES |
|
|
Sartorius |
SECURA224-1S |
Balance |
YES |
|
|
Shimadzu |
TXB422L |
Balance |
YES |
|
|
Shimadzu |
UW820S |
Balance |
YES |
|
|
Shimadzu |
UX2200H |
Balance |
YES |
|
|
Thermo |
Orion 2 Star |
pH meter |
YES |
|
|
Thermo |
Orion 3 Star |
pH meter |
YES |
|
|
Thermo |
Orion 370 |
pH meter |
YES |
|
|
Thermo |
Orion 720 A+ |
pH meter |
YES |
|
|
Toki Sangyo |
RE-80U |
Viscometer |
YES |
|
|
Toki Sangyo |
RE-85U |
Viscometer |
YES |
|
|
Toki Sangyo |
TVE-25H |
Viscometer |
YES |
|
|
Toyama Sangyo |
TK-362CPN |
Disintegration test machine |
YES |
|
ADDITIONAL INFORMATION
id57949, MSDS, SUPNG