How to apply (in TargetLynx) the calibration curve from one compound to the response of another compound for which there are no analytical standards - WKB5722
Article number: 5722
OBJECTIVE or GOAL
Apply the calibration curve from one compound for which an analytical standard is available to a compound for which no analytical standard is available.
ENVIRONMENT
- MassLynx 4.1
- TargetLynx 4.1
- MassLynx 4.2
- TargetLynx XS
PROCEDURE
- Open TargetLynx Method Editor.
- Add the compound that has an analytical standard to the Compound list.
- Specify appropriate parameters for Compound, Integration, and Calibration properties.
- Add the compound that does not have an analytical standard to the Compound list.
- Specify appropriate parameters for Compound and Integration Properties.
- In the Calibration Properties, set the Calibration Reference Compound to the compound that has an analytical standard whose calibration curve you need to apply to this compound.
- If you do not see the Calibration Reference Compound field In Calibration Properties, right-click in the Calibration Properties window and put a check mark next to the Calibration Reference Compound parameter.
- Process data with TargetLynx.
ADDITIONAL INFORMATION
id5722, MLYNX, MLYNXV41, SUPMM, TARLYNX41