Message: Waiting for inlet start 1 - WKB54151
Article number: 54151
SYMPTOMS
- "Waiting for inlet start 1" message
- Sample manager is not injecting sample
- Sample manager is not present in the console
- "Inlet not ready" error
ENVIRONMENT
- MassLynx
CAUSE
Unknown / driver corruption
FIX or WORKAROUND
- Deconfigure the inlet editor.
- Close MassLynx.
- Reboot the computer.
- Launch MassLynx.
- Configure the inlet editor.
- If the issue persists, re-install drivers.
ADDITIONAL INFORMATION
It has been reported that this issue can also be resolved by re-installing the MassLynx as well as drivers.
id54151, MLYNX, MLYNXV41, SUPMM