How to increase the number of decimal places in an OpenLynx report - WKB45146
Article number: 45146
OBJECTIVE or GOAL
Change the number of decimal places/significant figures reported in the OpenLynx report and copied data.
ENVIRONMENT
- MassLynx
- OpenLynx / Diversity Browser
PROCEDURE
In the OpenLynx browser:
- Go to File > Report Scheme Open... > Browse to the relevant Report Scheme Setting (ORS) file.
- Open the Report Scheme:
- Go to File > Report Scheme Settings...
- Click the Decimal Places tab.
(Here you can set the number of decimal places recorded for each parameter.) - Change the required value to a value from 0-4 (4 is the maximum number of decimal places).
- Repeat for any other parameters that need to be adjusted.
- Save the Report Scheme. Go to File > Report Scheme Save As...
- Data will now be reported with the required number of decimal places / significant figures.
Note: the values that can be modified are as follows:
Height, Area %BP, Width,TIC, Error PPM, BPI, Error mDa, BPM, Expected Mass, Area Abs, Observed Mass
ADDITIONAL INFORMATION
id45146, MLYNX, MLYNXV41, SUPMM