How do you set up OALogin to print OpenLynx reports automatically with no user action or intervention? - WKB234391
Article number: 234391
OBJECTIVE or GOAL
Set up OALogin to print OpenLynx reports automatically with no user action or intervention.
ENVIRONMENT
- MassLynx
- OpenLynx
- OALogin
PROCEDURE
- In OALogin, Under Admin > User Configuration > Edit Group > Printing OALogin Report File, clear the selection for Enable User Print Control.
- To print each sample to an individual report:
- From the OpenLynx Shortcut menu in MassLynx, go to Setup to open the OpenLynx method file (.olp).
- On the Printing tab, select Per Sample Printing.
- Browse in the appropriate OpenLynx Report Scheme (.ors) file.
- Save the .olp file.
- To print all samples to a single batch report:
- From the OpenLynx Shortcut menu in MassLynx, go to OAManager.
- Under the File menu, go to Print Report Format.
- Select Print OALogin reports upon Job completion.
- Specify an appropriate OpenLynx Report Scheme (.ors) file.
ADDITIONAL INFORMATION
Note: Do not enable both Per Sample Printing and Print OALogin reports upon Job completion. This results in duplicate reports.
id234391, MLYNX, MLYNXV41, SUPMM