How to mirror a derived channel in Empower - WKB7839
Article number: 7839
OBJECTIVE or GOAL
Mirror a two-dimensional chromatogram.
ENVIRONMENT
- Empower
- Empower 2
- Empower 3
PROCEDURE
- Open the Method Set used to acquire the data.
- Ensure that the Instrument Method listed at the top is selected.
- Go to the top and choose "File - Create New Derived Channel".
- In the window that opens, click the Channel drop-down menu.
- Select the appropriate channel.
- With two-dimensional chromatogram, select the available channel from the menu.
- With three-dimensional chromatogram, select "PDA: Single Wavelength" and specify the target wavelength.
- Change the "Constant" value to minus 1 "-1.000000".
- Click "OK" at the bottom of the window.
- Enter a name for this channel.
- Click "OK" at the bottom of the window.
- The channel is now listed in the table at the center of the Method Set Editor window.
- Apply the new method set to an injection (not a channel) to see the chromatogram invert or flip.
- Save All results.
- Select the original result and the inverted result and open into Review.
- Select the Plot Overlay to see the two results mirrored.
ADDITIONAL INFORMATION
id7839, EMP2LIC, EMP2OPT, EMP2SW, EMP3GC, EMP3LIC, EMP3OPT, EMP3SW, EMPGC, EMPGPC, EMPLIC, EMPOWER2, EMPOWER3, EMPSW, SUP