How to configure an Agilent LC-CE or -GC from Empower client or Citrix server - WKB250990
Article number: 250990
OBJECTIVE or GOAL
Configure an Agilent LC-CE or -GC from Empower client or Citrix server.
ENVIRONMENT
- Empower Enterprise
- Agilent Instrument Control Framework (ICF)
- CTC PAL Autosampler
- Agilent 1260 Infinity
- Agilent 7890 GC
- Agilent 7697A Headspace
- Agilent 6890 GC
- Agilent 6850 GC
- Agilent 8697 Headspace
- Agilent 8890 GC
PROCEDURE
- Navigate to Empower > Configuration Manger > Tools > Agilent Pre-Configuration.
- Type the Hostname or the IP address of the LAC/E on the network (not the IP address of the instrument).
- Select New.
- Select Configure.
- Specify the IP address of the instrument.
- Configure as normal, as noted in the release notes..
ADDITIONAL INFORMATION
[CRI-2956] With ICF Support Layer 3.5 to 3.6.1, you may not be able to configure the instruments from the client.
Note: Using ICF Support Layer 3.7, you can configure the instruments from the client. When ICF Support Layer 3.7 is installed on a client and ICF Support Layer 3.5, 3.5.1, 3.6, or 3.6.1 is installed on the LAC/E device, if you want to configure the instruments from a client, ensure that the firewall is disabled or that an exception is added to allow all programs to access port 58080.
id250990,