How to display only the last saved result in the table when calculating %RSD in Empower 3 Summary Report - WKB192638

OBJECTIVE or GOAL

Display only the last saved result in the table when calculating %RSD in Empower 3 Summary Report.

ENVIRONMENT

• Empower 3
• There are two results (before and after manual modification) for a single sample
• Calculate the %RSD in the Summary Report only with the post-modified result

PROCEDURE

If you manually modify a result and then newly save the result, the check box in the Results Superseded column will be ON for the previous result.
By making the following configuration, you can extract only the manually modified results to the table.

1. Click the Data Filtering Conditions button on the Order By tab of the Table Properties window.

2. Expand the "Results" in the tree bar on the left-hand side of the Data Filtering Conditions window, and double-click Results Superseded to add it to the table on the right-hand side.

3. Click the “Condition 1” cell in the Results Superseded row and select “No” from the drop-down list.

4. Click “OK” three times.

*With this configuration, for the results with "Results Superseded" set to "No", only the last saved result will be displayed in the table for the same channel.

ADDITIONAL INFORMATION