Connecting to the electricity source
Article number: 208297
The mass spectrometer requires a separate, grounded electricity source. The ground connection in the electrical outlet must be common and connected near the system.
To connect to the electricity source:
Recommendation: Use a line conditioner or an uninterruptible power supply (UPS) for optimum long-term input voltage stability.
WARNING: To avoid electric shock, use SVT-type power cords in the United States and HAR-type (or better) cords in Europe. The power cords must be replaced only with ones of adequate rating. For information regarding which cord to use in other countries, contact your local Waters distributor.
- Connect the female end of the power cord to the receptacle on the rear panel of the mass spectrometer.
- Connect the male end of the mass spectrometer power cord to a suitable 200 to 240 V AC wall outlet.