205001657 Waters ionKey/MS with ZenFit Connection Technology Accessories Kit

186007049

1

iKey, Infusion

Infusion iKey, used for performing infusion

186008450

1

iKey, Diagnostic Device, V3

Diagnostic iKey, used to test the integrity of the fluidics on the system

289011122

2

Plug, finger tight fitting

Plug used for leak testing and flow controller calibrating

289011562

3

Adapter, F-M, finger tight fitting

Used on µBSM and ASM outlets

415001839

1

Bellows, gas

Spare gas nebulizing bellows that attaches to the gas/high voltage block

430004966

2

Assy, capillary & fittings, 25um x 20in.

Connects solvent manager outlet to sample manager inject valve port 5 when using 150µm ID iKeys

430004967

1

Assy, capillary & fittings, 40um x 20in.

Connects solvent manager outlet to sample manager inject valve port 5 when using 300µm ID iKeys

430004995

1

Assy, FTF capillary 40um x 40" inlet

Inlet line for iKey, connects µSM-FL inject valve port 6 to iKey/inlet

430005000

1

Assy, FTF capillary, 100um x29.5" infus.

Connects to the diverter valve on the MS to route infusion liquid flow to ionKey source with infusion iKey installed

430005071

1

Assy, capillary & fittings, 25um x 60 in

Connects optional Auxiliary Solvent Manager (ASM) to MS fluidics valve for Lock Mass eluent delivery

441121820

1

Assy,cable, SM-FL to clamp source

Connects the ionKey source to the µSM-FL rear panel

605000135

1

Tool, 6mm Wrench, Right Angle

Used for replacing gas fitting (source end)