200000427 Waters ACQUITY Arc Column Heater/Cooler Startup Kit

WAT027-02

60”

Tubing PEEK .062 X .010

Peek Tubing for Alliance PPH (.009" ID)

WAT081265

4

Screw, M3 x 10 SEMS

Screws to Mount Bracket to Oven

WAT410330

4

Washer, Plain, SST, M3 x M9

Washers to Mount Bracket to Oven

WAT410440

3

Washer, Lock, Split, M4 x M7.6, SST

Lock Washers for Mounting Standoffs to Stack Side Panels

WAT411450

3

Screw, M4 x 50, Pan Head, Torx, SST

Screws for Mounting Standoffs to Stack Side Panels

330000136

2

Fuse, 3.15A, 250V, 5X20MM Fast-Acting UL

Spare Power Supply Fuses (Heater / Cooler Only)

405003608

1

Scr, Comp, 10-32, 1/4 Hex 304 SS, Gold Plt

Used to Connect the Preheater to the Union

405018042

1

Screw, Compression, Locking, Knurled

Compression Screw for Connecting PPH to Column

405018204

1

Ferrule, Back Locking, PEEK, 1/16

Locking Ferrule for Connecting PPH to Column

405019965

3

Standoff, Mount, 30cm CH/CHC Oven to ACQUITY

Spacers to Mount and Offset Oven to ACQUITY Stack

410000274

4

Fitting, Litetouch, .062 OD, 10-32, PEEK

Fittings for Connecting Alliance PPH (.009" ID)

410000704

1

Y-Connector, Barbed, 1/4" ID Tube

Used to Connect CH or CHC Drain Line to System Drainage

410000763

4

Ferrule, PEEK w/ SS Lock  Ring, .062 ID

Ferrules for Connecting Alliance PPH (.009" ID)

410000767

2

Retainer

Used to Hold Drain Tubing to Bench Top

410000797

1

Fitting, Barbed, Elbow, 1/4 ID

Used for Drain Line Bends at Bench Top

410001349

1

Ferrule, Set, .062, Two-Piece

Used to Connect the Preheater to the Union

415000221

1

Fitting, 1/4 Barbed To 1/8-27 NPT

Installed into Drip Tray, Connects to Drain Line

415000353

1

Drip Tray

Slides Inside Bottom of Unit for Leak Management

430001022

1

Tubing, Flexible, .25" ID X .38" OD X 60" L

Waste Line, Attaches to Drip Tray

441001646

1

Assy, Cable, SM to CH/CHC

Connects the Sample Manager to the CH or CHC