How to assign a different plate for each tray on MassLynx - WKB231663
Article number: 231663
OBJECTIVE or GOAL
Assign a different plate for each tray in MassLynx.
ENVIRONMENT
- MassLynx
- ACQUITY
PROCEDURE
- Go to Inlet Method, click ACQUITY autosampler and then plate generator.
- Create the appropriate plate, and then save.
- Go to Inlet Method, click ACQUITY autosampler and then bed layout.
- Click edit plate on layout.
- Position the pointer on one of the two plate beds—the one on top is Tray 1, the bottom is Tray 2.
- Click on one of the trays and select the desired plates.
- Save the inlet method. You should now see two trays with different plates.
ADDITIONAL INFORMATION
id231663, MLYNX, MLYNXV41, SUPMM