e-SAT/IN: power light blinking green, data light (LED) off - WKB7691
Article number: 7691
SYMPTOMS
- Power light blinking green, data light off
- In the Empower message center: Error is "an instruction of stop has failed to be sent"
ENVIRONMENT
- Waters e-SAT/IN
- Empower 3
CAUSE
IP address not configured.
FIX or WORKAROUND
- Configure the IP address.
- Please check e-SAT/IN Module Installation Guide, document number: 71500049404. Attached below is a screen shot from the same document.
ADDITIONAL INFORMATION