Z axis is not calibrated on ACQUITY UPLC I-Class - WKB100591
Article number: 100591
SYMPTOMS
- Z axis not calibrated error
ENVIRONMENT
- ACQUITY UPLC I-Class
CAUSE
Leak in needle seal tubing
FIX or WORKAROUND
- Correct the leak.
- Calibrate needle seal.
- Calibrate Z axis.
ADDITIONAL INFORMATION
id100591, UPBSMIVD, UPIBSM, UPIBSM+, UPIBSMIVD, UPISMFL, UPISMFL+, UPISMFTIVD, UPISMFTN, UPISMFTN+, UPLCCOLHTR, UPNBINARY, UPSMIVD, UPSMPMGR