How to set DHCP or Static IP address when using Agilent Headspace and Empower - WKB1840

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

Article number: 1840

OBJECTIVE or GOAL

Setting DHCP or Static IP address when using Agilent Headspace.

ENVIRONMENT

Empower
7890/Agilent GC with 7697A Headspace

PROCEDURE

You can enable DHCP for the A7890 using the Options button on its front panel, scroll to Communications and press Enter. Scroll to Enable DHCP and press ON/Yes. When prompted turn the instrument off and then on again.

ADDITIONAL INFORMATION

See chapter "Set the IP address" in the Agilent 7697A Installation and First Startup manual

id1840, 7890 GC, 7890 GCDET, 7890BGC, comms, EMP2LIC, EMP2OPT, EMP2SW, EMP3GC, EMP3LIC, EMP3OPT, EMP3SW, EMPGC, EMPGPC, EMPLIC, EMPOWER2, EMPOWER3, EMPSW, HEADSPACE, HS7697B, SUP