What is the part number for the guard cartridge to protect SKU: WAT027324 - µBondapak C18 Column, 125Å, 10 µm, 3.9 mm X 300 mm, 1/pk - WKB31440
Article number: 31440
ENVIRONMENT
- µBondapak
- C18
- Column
- Guard
- Cartridge
- Column protection
- Sentry
- Guard-Pak
ANSWER
Option 1:
- SKU: WAT044480 - µBondapak C18 Sentry Guard Cartridge, 125Å, 10 µm, 3.9 mm X 20 mm, 2/pk
- SKU: WAT046910 - Holder Kit for Cartridge and Guard Columns (required in order to use SKU: WAT044480)
Option 2:
- SKU: WAT088070 - µBondapak C18 Guard-Pak Insert, 125Å, 10 µm, 10/pk
- SKU: WAT088141 - Guard-Pak Holder (required in order to use SKU: WAT088070)
ADDITIONAL INFORMATION
≥3 µm Analytical HPLC Columns Chapter from current catalog
Sentry Guard Columns Care & Use Manual
Guard-Pak Holder Care & Use Manual
SKU: WAT046910 includes a "U" shaped connector which allows you to connect to your column. This contains one compression screw and one ferrule on each end of the connector. The ferrules are already seated to the Waters ferrule depth setting.
SKU: WAT088141 includes 4 Waters Stainnless steel compression screws and 4 Waters stainless steel ferrules. You can slip these onto 1/16 inch outside diameter stainless steel tubing to then connect the Guard Pak Holder to your column.
id31440,