How to measure column plate count - WKB29097
Article number: 29097
OBJECTIVE or GOAL
Measure column plate count.
ENVIRONMENT
- Column
- plate count
- GPC
- APC
- HPLC
- ACQUITY
PROCEDURE
- Follow the column efficiency test procedure as stated on the test sheet.
- Measure the peak width at the % height specified by the plate count calculation the column test procedure used to calculate.
- Conduct this procedure on a column that has not been used, so it can serve to benchmark column performance over time.
ADDITIONAL INFORMATION
For additional information, see Figure 6 in the Styragel Columns Care and Use Manual
For additional information also see Figure 10 on web page Bands, Peaks and Band Spreading and Analytical Columns and Cartridges Care and Use Manual
Thi picture is an example of methods of Calculating Column Efficiency; it illustrates the use of the different peak widths of a Gaussian peak for the calculation of column efficiency (N).
id29097, EMPGPC, GPCV2K, UPASMFTN, UPBINARY