What are the part numbers for the connectors to connect two Waters HPLC, UHPLC, or UPLC columns? - WKB227746
ENVIRONMENT
- HPLC
- UHPLC
- UPLC
- Column connectors
- pictures
ANSWER
U-Shaped Connectors:
WAT084080 - Tubing Assembly, Column Joining (0.009" ID) (Typically used for Waters HPLC columns)
***The ferrules are permanently seated to Waters ferrule depth setting upon receipt. (Will not work for Waters Spherisorb Columns because that hardware is different)
700009535 - Tubing Assembly, 'U' Column Connection, .004 ID (Typically used for UPLC or UHPLC columns)
***Ferrules are not staked on tubing upon receipt.
**The two-piece ferrule is permanently seated upon installation, when the fitting is tightened into the column.
Straight Connectors:
WAT022681 - Assembly, Rigid Connector (0.005" I.D.) (Typically used for HPLC with Waters HPLC Columns, excluding Spherisorb columns)
***The ferrules are permanently seated to Waters depth setting upon receipt.
700009524 - Tubing Assembly, Inline Column Connection, .005 ID (Typically used for UPLC or UHPLC)
***Ferrules are lightly staked on tubing upon receipt.
***The two-piece ferrule is permanently seated upon installation, when the fitting is tightened into the column.
186006613 - 0.005" X 1.75" UPLC SEC Connection Tubing - 2 per pack (Typically used for UPLC or UHPLC)
***Ferrules are lightly staked on tubing upon receipt.
***The two-piece ferrule is permanently seated upon installation, whenthe fitting is tightened into the column.
ADDITIONAL INFORMATION
id227746,