What are the part numbers for the guard cartridges and guard cartridge holders that protect SKU: WAT084038 - Carbohydrate Analysis Column Amino (NH2) 125Å, 10 µm, 3.9 mm X 300 mm? - WKB196379
Article number: 196379
ENVIRONMENT
- Carbohydrate analysis
- Column protection
- SentryGuard
- Guard-Pak
ANSWER
Option 1:
- WAT046865 - µBondapak Amino (NH2) Sentry Guard Cartridge, 125Å, 10 µm, 3.9 mm X 20 mm, 2/pk
- WAT046910 - Holder Kit for Cartridge and Guard Columns (required in order to use WAT046865)
Option 2:
- WAT026760 - µBondapak Amino (NH2) Guard-Pak Insert, 125Å, 10 µm, 10/pk
- WAT088141 - Guard-Pak Holder (required in order to use WAT026760)
ADDITIONAL INFORMATION
The ≥3 µm Analytical HPLC Columns chapter in the current catalog
Sentry Guard Columns Care & Use Manual
Guard-Pak Holder Care & Use Manual
WAT046910 includes a U-shape connector that allows you to connect to your column. This contains one compression screw and one ferrule on each end of the connector. The ferrules are already seated to the Waters ferrule depth setting.
WAT088141 includes four Waters stainless steel compression screws and four Waters stainless steel ferrules. You can slip these onto 1/16-inch outside diameter stainless steel tubing to then connect the Guard-Pak holder to your column.
id196379,